H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 84
75
3.
Use the display current-configuration command to check whether the function of dropping
unknown IPv6 multicast data is enabled. If not, use the drop-unknown or mld-snooping
drop-unknown command to enable the function of dropping unknown IPv6 multicast data.
4.
Use the display mld-snooping group command to check whether any port has been configured as
a static member port of any IPv6 multicast group. If so, check whether this configuration conflicts
with the configured IPv6 multicast group policy. If any conflict exists, remove the port as a static
member of the IPv6 multicast group.
This manual is related to the following products:
- H3C WX5500E Series Access Controllers H3C WX3500E Series Access Controllers H3C WX2500E Series Access Controllers H3C WX6000 Series Access Controllers H3C WX5000 Series Access Controllers H3C LSWM1WCM10 Access Controller Module H3C LSUM3WCMD0 Access Controller Module H3C LSUM1WCME0 Access Controller Module H3C LSWM1WCM20 Access Controller Module H3C LSQM1WCMB0 Access Controller Module H3C LSRM1WCM2A1 Access Controller Module H3C LSBM1WCM2A0 Access Controller Module H3C WA3600 Series Access Points H3C WA2600 Series WLAN Access Points