H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 77)

68
3. Verify the configuration:
# Display detailed MLD snooping group information in VLAN 100 on AC.
[AC]display mld-snooping group vlan 100 verbose
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Port flags: D-Dynamic port, S-Static port, A-Aggregation port, C-Copy port
Subvlan flags: R-Real VLAN, C-Copy VLAN
Vlan(id):100.
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Router port(s):total 0 port(s).
IP group(s):the following ip group(s) match to one mac group.
IP group address:FF1E::1
(::, FF1E::1):
Attribute: Host Port
Host port(s):total 1 port(s).
WLAN-DBSS1:0 (D) ( 00:04:17 )
MAC group(s):
MAC group address:3333-0000-0101
Host port(s):total 1 port(s).
WLAN-DBSS1:0
The output shows that WLAN-DBSS 1:0 on AC joins the multicast group FF1E::1.
Multicast delivery to a wireless client (for the WX3024)
Network requirements
As shown in Figure 15 , the source sends multicast traffic to multicast group FF1E::1. The client is a member
of the multicast group.
The client and the source can communicate with each other and the client can receive multicast traffic
from the source.
Figure 15 Network diagram
Router A
Source
AC
GE 1/0/1 GE 1/0/2
IPv6 Multicast Packets
AP
Client
Switch
WLAN-ESS1