H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 100)

91
[AC] mac-vlan mac-address 6A-74-B3 vlan 2
[AC] mac-vlan mac-address A6-5B-89 vlan 3
# Enable IGMP snooping in VLAN 2 and VLAN 3.
[AC] vlan 2
[AC-vlan2] igmp-snooping enable
[AC-vlan2] quit
[AC] vlan 3
[AC-vlan3] igmp-snooping enable
[AC-vlan3] quit
# Configure VLAN 10 as a multicast VLAN.
[AC] multicast-vlan 10
# Assign WLAN-ESS 1 to VLAN 10.
[AC-mvlan-10] port WLAN-ESS 1
[AC-mvlan-10] quit
4. Verify the configuration:
# Display the multicast VLAN information on the access controller.
[AC] display multicast-vlan
Total 1 multicast-vlan(s)
Multicast vlan 10
port list:
WLAN-ESS1
# Display the IGMP snooping multicast group information on the access controller.
[AC] display igmp-snooping group
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Port flags: D-Dynamic port, S-Static port, A-Aggregation port, C-Copy port
Subvlan flags: R-Real VLAN, C-Copy VLAN
Vlan(id):10.
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Router port(s):total 0 port.
IP group(s):the following ip group(s) match to one mac group.
IP group address:224.1.1.1
(0.0.0.0, 224.1.1.1):
Host port(s):total 1 port.
WLAN-DBSS1:1 (D)
MAC group(s):
MAC group address:0100-5e01-0101
Host port(s):total 1 port.
WLAN-DBSS1:1
As shown above, IGMP snooping is maintaining the router ports and member ports in VLAN 10.