H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 88)

79
Configuration procedure
To configure multicast VLAN ports in multicast VLAN view:
Step Command Remarks
1. Enter system view. system-view N/A
2. Configure the specified VLAN
as a multicast VLAN and enter
multicast VLAN view.
multicast-vlan vlan-id
A VLAN is not a multicast VLAN
by default.
3. Assign ports to the multicast
VLAN.
port interface-list
By default, a multicast VLAN has
no ports.
To configure multicast VLAN ports in interface view or port group view:
Step Command Remarks
1. Enter system view. system-view N/A
2. Configure the specified VLAN
as a multicast VLAN and enter
multicast VLAN view.
multicast-vlan vlan-id
A VLAN is not a multicast VLAN by
default.
3. Return to system view. quit N/A
4. Enter interface view or port
group view.
• Enter interface view:
interface interface-type
interface-number
• Enter port group view:
port-group manual
port-group-name
Use either command.
5. Assign the current port to the
multicast VLAN.
port multicast-vlan vlan-id
By default, a user port does not
belong to any multicast VLAN.
Displaying and maintaining a multicast VLAN
Task Command Remarks
Display information about a
multicast VLAN.
display multicast-vlan [ vlan-id ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view
Multicast VLAN configuration examples
Port-based multicast VLAN configuration example (for the
WX5000 series)
Network requirements
As shown in Figure 19 , Router connects to a multicast source (the source) through Ethernet 1/1, and to AC
through Ethernet 1/2. AC connects to Router through GigabitEthernet 1/0/1, and to Switch through