H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 30)

21
Step Command Remarks
3. Enable the IGMP snooping
host tracking function
globally.
host-tracking Disabled by default
Enabling the IGMP snooping host tracking function in a VLAN
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter VLAN view. vlan vlan-id N/A
3. Enable the IGMP snooping
host tracking function in the
VLAN.
igmp-snooping host-tracking Disabled by default
Displaying and maintaining IGMP snooping
Task Command Remarks
Display IGMP snooping group
information.
display igmp-snooping group
[ vlan vlan-id ] [ verbose ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Display information about the hosts
tracked by IGMP snooping.
display igmp-snooping host vlan
vlan-id group group-address
[ source source-address ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Display the statistics information of
IGMP messages learned by IGMP
snooping.
display igmp-snooping statistics [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Clear all the dynamic group entries
of a specified IGMP snooping
group or all IGMP snooping
groups.
reset igmp-snooping group
{ group-address | all } [ vlan
vlan-id ]
Available in user view. This
command cannot remove the static
group entries of IGMP snooping
groups.
Clear the statistics information of
all kinds of IGMP messages
learned by IGMP snooping.
reset igmp-snooping statistics Available in user view.
IGMP snooping configuration examples
IMPORTANT:
Check Table 2 to see where you configure Ethernet interfaces.