Westermo MRI-128-F4G-PSE24 - Manual (Page 69)

65
Status : Enabled
Host 1 :
Target IP : 192.168.2.100
Cycle Time : 10
Host 2 :
Target IP : 192.168.2.200
Cycle Time : 20
Host 3 :
Target IP : 192.168.2.15
Cycle Time : 30
Host 4 :
Target IP : 192.168.2.20
Cycle Time : 40
Syntax show poe schedule IFNAME
Parameters IFNAME : interface name
Command Mode Enable mode
Description Display the status of schedule of interface.
Examples Switch# show poe schedule fa1
Interface fastethernet1
POE Schedule
Status : Disable
Weekly Schedule :
Sunday : 0,1,2,3,4,5,6,7,8,19,20,21,22,23
Monday : 0,1,2,3,4,5,6,7,8,19,20,21,22,23
Tuesday : 0,1,2,3,4,5,6,7,8,19,20,21,22,23
Wednesday : 0,1,2,3,4,5,6,7,8,19,20,21,22,23
Thursday : 0,1,2,3,4,5,6,7,8,19,20,21,22,23
Friday : 0,1,2,3,4,5,6,7,8,19,20,21,22,23
Saturday :
0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20
Syntax poe powering-mode 802.3af/forced
Parameters 802.3af: deliver power if and only if the attached PD
comply with IEEE 802.3af
forced: deliver power no maater what PD attached
Command Mode Interface mode
Description Set the Powring mode of PoE
Examples EX 1: Set 802.3af powring mode
Switch(config)# poe powering-mode 802.3af