Westermo MRI-128-F4G-PSE24 - Manual (Page 129)

125
SNMP Community
Read Only
Community
Switch(config)# snmp-server community public ro
community string add ok
Read Write
Community
Switch(config)# snmp-server community private
rw
community string add ok
SNMP Trap
Enable Trap Switch(config)# snmp-server enable trap
Set SNMP trap enable ok.
SNMP Trap Server IP
without specific
community name
Switch(config)# snmp-server host 192.168.2.33
SNMP trap host add OK.
SNMP Trap Server IP
with version 1 and
community
Switch(config)# snmp-server host 192.168.2.33
version 1 private
SNMP trap host add OK.
Note: private is the community name, version 1
is the SNMP version
SNMP Trap Server IP
with version 2 and
community
Switch(config)# snmp-server host 192.168.2.33
version 2 private
SNMP trap host add OK.
Disable SNMP Trap Switch(config)# no snmp-server enable trap
Set SNMP trap disable ok.
Display Switch# sh snmp-server trap
SNMP trap: Enabled
SNMP trap community: public
Switch# show running-config
.......
snmp-server community public ro
snmp-server community private rw
snmp-server enable trap
snmp-server host 192.168.2.33 version 2 admin
snmp-server host 192.168.2.33 version 1 admin
……..