Westermo MRI-128-F4G-PSE24 User Manual
Page 161
157
Disable Port
Mirror
Switch(config)# mirror disable
Mirror set disable ok.
Select Source Port Switch(config)# mirror source fa1-2
both Received and transmitted traffic
rx Received traffic
tx Transmitted traffic
Switch(config)# mirror source fa1-2 both
Mirror source fa1-2 both set ok.
Note: Select source port list and TX/RX/Both
mode.
Select Destination
Port
Switch(config)# mirror destination fa6
Mirror destination fa6 set ok
Display
Switch# show mirror
Mirror Status : Enabled
Ingress Monitor Destination Port: fa6
Egress Monitor Destination Port: fa6
Ingress Source Ports :fa1,fa2,
Egress Source Ports :fa1,fa2,
Event Log
Display
Switch# show event-log
<1>Jan 1 02:50:47 snmpd[101]: Event: Link 4
Down.
<2>Jan 1 02:50:50 snmpd[101]: Event: Link 5 Up.
<3>Jan 1 02:50:51 snmpd[101]: Event: Link 5
Down.
<4>Jan 1 02:50:53 snmpd[101]: Event: Link 4 Up.
Ping
Ping IP
Switch# ping 192.168.2.33
PING 192.168.10.33 (192.168.2.33): 56 data bytes
64 bytes from 192.168.2.33: icmp_seq=0 ttl=128
time=0.0 ms
64 bytes from 192.168.2.33: icmp_seq=1 ttl=128
time=0.0 ms
64 bytes from 192.168.2.33: icmp_seq=2 ttl=128
time=0.0 ms
64 bytes from 192.168.2.33: icmp_seq=3 ttl=128
time=0.0 ms