Verilink QUAD/IMUX (880-502392-001) Product Manual - Manual (Page 9)

Verilink QUAD/IMUX User Manual
1-1
Chapter
1
Overview
This manual describes Verilink’s Access System 2000 T1/E1 Inverse
Multiplexer system (QUAD/IMUX). It is assumed that the reader is
familiar with basic telecommunications and the AS2000 platform
(see the manual AS2000: The Basics for information about the
AS2000 platform).
Manual Organization
The contents of this manual are divided according to the following
plan.
• This chapter contains an overview of the QUAD/IMUX product
and includes features and specifications.
• Chapter 2, " Quick Set-Up ", contains a Quick-Start Guide which
gives a step-by-step installation procedure for a typical United
States T1 installation.
• Chapter 3, " E1 Configuration Menus ", contains detailed
information on the E1 version of the QUAD/IMUX used in
Europe and most of the world outside North America.
• Chapter 4, " T1 Configuration Menus ", contains detailed
information on the T1 version used in North America, the
Philipine Islands and Japan.
• Chapter 5, " Performance Monitoring ", details the performance
monitoring features of the QUAD/IMUX.
• Chapter 6, " Diagnostics ", explains the diagnostic features of
the QUAD/IMUX.
• Appendix A, " Default Configuration ", presents the factory
default values for the QUAD 2164 and IMUX 2160 modules
used in the QUAD/IMUX.
Other Manuals General information on Verilink products, and information on
other, related products is listed below.
• The manual AS2000: The Basics provides detailed information
on AS2000 shelves, cables and physical installation
procedures.
• The NCM 2000 User Manual provides information on the Node
Controller Module which is often used to control a QUAD/IMUX
installation.