Verilink QUAD/IMUX (880-502392-001) Product Manual - Manual (Page 15)

Overview
Verilink QUAD/IMUX User Manual
1-7
Specifications
Table 1-1 lists the specifications of the QUAD 2164 module.
Table 1-1 QUAD 2164 Module
Table 1-2 Connector Interface Modules for the QUAD 2164
T1 Version E1 Version
Number of
Network Ports
4 per module 4 per module
Line Rate 1.544 Mbit/s ± 32 ppm 2.048 Mbit/s ± 32 ppm
Line Code AMI, B8ZS HDB3
Framing
Format
SF or ESF E1
Impedance 100 Ohms ± 5% 120 Ohms ± 5%, 75 Ohms ± 5%
Input Level CIM 2064 and CIM 2068: 3.0 V ± 0.3 V
base-to-peak, attenuated by 0 to 27.5 dB
CIM 29001LP — 75 Ohms
CIM 29120LP — 120 Ohms
Output Level 3.0 V ± 0.3 V base-to-peak or DSX-1 into
100 Ohms at 0 dB LBO
N/A
Output LBO
[CIM 2064]
0, 7.5, 15, or 22.5 dB (0 to 3000 feet),
selectable
N/A
Equalization
[CIM 2068]
1-133 ft., 133-266 ft., 266-399 ft., 399-
533 ft., 533-655 ft.
Loopbacks Line, Payload, Repeater (local) Line, Payload, Repeater (local)
Timing Modes External, Network, and Internal External, Network, and Internal
Technical and
Regulatory
Compliance
AT&T 54016, AT&T 62411, ANSI T1.403,
FCC Part 68, UL 1459 Revision 2
ITU-T G.826, G.703, G.704, G.732
LED Indicators
(Tricolor)
4 Network, 1 System 4 Network, 1 System
Management
Ports
Front Panel 10BaseT Ethernet port for
support of three subsets of TCP/IP: SNMP,
Telnet and FTP (8-pin, RJ-45)
Local Craft serial port (6-pin, RJ-11)
Front Panel 10BaseT Ethernet port for
support of three subsets of TCP/IP: SNMP,
Telnet and FTP (8-pin, RJ-45)
Local Craft serial port (6-pin, RJ-11)
Connector Interface Modules for QUAD 2164
Module Electrical Interface Physical Interface Bandwidth Capacity
CIM 2064 T1 DS-1 RJ-45 (8-pin) 1.544 Mbit/s x 4
CIM 2068 T1 DSX-1 RJ-45 (8-pin) 1.544 Mbit/s x 4
CIM 29001LP CEPT-1 75 Ohm BNC (Coax) 2.048 Mbit/s x 4
CIM 29120LP CEPT-1 120 Ohm RJ-48C (8 pin) 2.048 Mbit/s x 4