Verilink QUAD/IMUX (880-502392-001) Product Manual - Manual (Page 34)

Quick Set-Up
2-16
Verilink QUAD/IMUX User Manual
Figure 2-13 QUAD 2164 Timing Menu
9. This site has one QUAD 2164 module which connects to four
T1 circuits from the same carrier, and that carrier is providing
timing. We will set the configuration so that the shelf can time
from any of the first three T1 circuits. Use the “PC”, “PS”, “PA”,
“SC”, “SS”, “SA”, “TC”, “TS” and “TA” commands to set all of
the values shown in
Figure 2-13 (above). Then exit from the
Timing Menu with “X” and use the “A” command to access the
Alarm Configuration Menu.
Figure 2-14 QUAD 2164 Alarm Configuration Menu
-- QUAD 2164 CONFIGURATION MENU (TIMING OPTIONS)-- -- QUAD 2164 CONFIGURATION MENU (TIMING OPTIONS)-- -- QUAD 2164 CONFIGURATION MENU (TIMING OPTIONS)-- -- QUAD 2164 CONFIGURATION MENU (TIMING OPTIONS)--
Current shelf timing source: Card 1, NET 1 Current shelf timing source: Card 1, NET 1 Current shelf timing source: Card 1, NET 1 Current shelf timing source: Card 1, NET 1
Source Slot Number Synchronization Auto Restore Source Slot Number Synchronization Auto Restore Source Slot Number Synchronization Auto Restore Source Slot Number Synchronization Auto Restore
PRIMARY PC) 1 PS) NET 1 PA) YES PRIMARY PC) 1 PS) NET 1 PA) YES PRIMARY PC) 1 PS) NET 1 PA) YES PRIMARY PC) 1 PS) NET 1 PA) YES
SECONDARY SC) 1 SS) NET 2 SA) YES SECONDARY SC) 1 SS) NET 2 SA) YES SECONDARY SC) 1 SS) NET 2 SA) YES SECONDARY SC) 1 SS) NET 2 SA) YES
TERTIARY TC) 1 TS) NET 3 TA) YES TERTIARY TC) 1 TS) NET 3 TA) YES TERTIARY TC) 1 TS) NET 3 TA) YES TERTIARY TC) 1 TS) NET 3 TA) YES
R) Receive clock from shelf: YES R) Receive clock from shelf: YES R) Receive clock from shelf: YES R) Receive clock from shelf: YES
X) exit this screen
X) exit this screen X) exit this screen X) exit this screen
[1,1] QUAD 2164 > [1,1] QUAD 2164 > [1,1] QUAD 2164 > [1,1] QUAD 2164 >
-- QUAD 2164 CONFIGURATION MENU (ALARM OPTIONS)-- -- QUAD 2164 CONFIGURATION MENU (ALARM OPTIONS)-- -- QUAD 2164 CONFIGURATION MENU (ALARM OPTIONS)-- -- QUAD 2164 CONFIGURATION MENU (ALARM OPTIONS)--
N) NMS Address: 128.0.0.0 N) NMS Address: 128.0.0.0 N) NMS Address: 128.0.0.0 N) NMS Address: 128.0.0.0
D) Alarm declare time: 1
D) Alarm declare time: 1 D) Alarm declare time: 1 D) Alarm declare time: 1
A) Card Alarm Reporting: NO
A) Card Alarm Reporting: NO A) Card Alarm Reporting: NO A) Card Alarm Reporting: NO
PORT 1 PORT 2 PORT 3 PORT 4 PORT 1 PORT 2 PORT 3 PORT 4 PORT 1 PORT 2 PORT 3 PORT 4 PORT 1 PORT 2 PORT 3 PORT 4
Pn) Alarm Reporting NO NO NO NO Pn) Alarm Reporting NO NO NO NO Pn) Alarm Reporting NO NO NO NO Pn) Alarm Reporting NO NO NO NO
Ln) Line Restoral OFF OFF OFF OFF
Ln) Line Restoral OFF OFF OFF OFF Ln) Line Restoral OFF OFF OFF OFF Ln) Line Restoral OFF OFF OFF OFF
Cn) CRC Threshold 0 0 0 0
Cn) CRC Threshold 0 0 0 0 Cn) CRC Threshold 0 0 0 0 Cn) CRC Threshold 0 0 0 0
Sn) SES Threshold 0 0 0 0
Sn) SES Threshold 0 0 0 0 Sn) SES Threshold 0 0 0 0 Sn) SES Threshold 0 0 0 0
Un) UAS Threshold 0 0 0 0
Un) UAS Threshold 0 0 0 0 Un) UAS Threshold 0 0 0 0 Un) UAS Threshold 0 0 0 0
Bn) BER Threshold DISABLE DISABLE DISABLE DISABLE
Bn) BER Threshold DISABLE DISABLE DISABLE DISABLE Bn) BER Threshold DISABLE DISABLE DISABLE DISABLE Bn) BER Threshold DISABLE DISABLE DISABLE DISABLE
Tn) TOD HH:MM 00:00 00:00 00:00 00:00
Tn) TOD HH:MM 00:00 00:00 00:00 00:00 Tn) TOD HH:MM 00:00 00:00 00:00 00:00 Tn) TOD HH:MM 00:00 00:00 00:00 00:00
In) Clear Interval 0 0 0 0
In) Clear Interval 0 0 0 0 In) Clear Interval 0 0 0 0 In) Clear Interval 0 0 0 0
X) exit this screen X) exit this screen X) exit this screen X) exit this screen
[1,1] QUAD 2164 > [1,1] QUAD 2164 > [1,1] QUAD 2164 > [1,1] QUAD 2164 >