Configuration menu, Configuring the e1 port, Configuration menu -7 – Verilink DIDCSU 2912 (880-502646-001) Product Manual User Manual

Page 79: Configuring the e1 port -7, Figure 4-4

DIDCSU E1 Version

Verilink DIDCSU 2912 User Manual

4-7

Configuration Menu

Use the Configuration Menu to configure your E1 port, data port,
or timing options. Access this menu from the Main Menu, by
entering “C”.

Figure 4-4 Configuration Menu

Configuring the

E1 Port

To access the E1 Port Configuration Menu, enter “P” from the
Configuration Menu.

To change a port configuration, enter the command letter followed
by the port number. For example, to remove port 2 from service,
command In, enter “

2” (n is a variable that identifies the port

number).

Figure 4-5 E1 Port Configuration Menu

-- DIDCSU 2912 CONFIGURATION MENU --

P) E1 port D) data port

P) E1 port D) data port
X) exit this screen

X) exit this screen

A [0.0.0.204] [1,2] DIDCSU 2912 >

-- DIDCSU 2912 E1 PORT CONFIGURATION MENU --

PORT 1 PORT 2

In) In Service NO NO

In) In Service NO NO
En) CRC4 NO NO

En) CRC4 NO NO

En) CRC4 NO NO
Fn) Carrier Failure Alarm NO NO

Fn) Carrier Failure Alarm NO NO

Fn) Carrier Failure Alarm NO NO
Sn) FASE Alarm Category MINOR MINOR

Sn) FASE Alarm Category MINOR MINOR

Sn) FASE Alarm Category MINOR MINOR
Mn) Frame Mode 31 CHANNEL 31 CHANNEL

Mn) Frame Mode 31 CHANNEL 31 CHANNEL

Mn) Frame Mode 31 CHANNEL 31 CHANNEL
Nn) Alarm Declare Time(sec) 0 0

Nn) Alarm Declare Time(sec) 0 0

Nn) Alarm Declare Time(sec) 0 0
Bn) Enable Inband NO NO

Bn) Enable Inband NO NO

Bn) Enable Inband NO NO
Ln) Inband Timeslot 0 0

Ln) Inband Timeslot 0 0

C) CPE Side DIDCSU: NO

C) CPE Side DIDCSU: NO
T) timing

T) timing

T) timing
X) exit this screen

X) exit this screen

A [0.0.0.204] [1,2] DIDCSU 2912 >