Verilink DIDCSU 2912 (880-502646-001) Product Manual - Manual (Page 66)

DIDCSU T1 Version
3-26 Verilink DIDCSU 2912 User Manual
Figure 3-17 Net Port Alarm Threshold Status Menu
When finished reviewing the performance/status information,
enter “X” to return to the Main Menu.
Net Port Alarm Menu
To access the Net Port Alarm Menu from the Main Menu, enter
“A”. Use this menu to set alarm threshold values, monitor alarm
status, and set other alarm parameters. All monitored conditions
are reflected by the LED states. Note that alarm reporting must be
enabled at two levels: at each port and for the entire module. The
port alarm reporting is enabled using the Net Port Alarm
Threshold Configuration Menu,
Figure 3-19 .
Figure 3-18 Net Port Alarm Menu
-- DIDCSU 2912 NET PORT ALARM THRESHOLD STATUS MENU -- -- DIDCSU 2912 NET PORT ALARM THRESHOLD STATUS MENU -- -- DIDCSU 2912 NET PORT ALARM THRESHOLD STATUS MENU -- -- DIDCSU 2912 NET PORT ALARM THRESHOLD STATUS MENU --
Current Threshold Status PORT 1 PORT 2
Current Threshold Status PORT 1 PORT 2 Current Threshold Status PORT 1 PORT 2 Current Threshold Status PORT 1 PORT 2
LOF counts(exceeded) 2(N) 0(N)
LOF counts(exceeded) 2(N) 0(N) LOF counts(exceeded) 2(N) 0(N) LOF counts(exceeded) 2(N) 0(N)
interval 2 0
interval 2 0 interval 2 0 interval 2 0
LOS counts(exceeded) 2(N) 0(N)
LOS counts(exceeded) 2(N) 0(N) LOS counts(exceeded) 2(N) 0(N) LOS counts(exceeded) 2(N) 0(N)
interval 2 0
interval 2 0 interval 2 0 interval 2 0
RAI counts(exceeded) 0(N) 0(N)
RAI counts(exceeded) 0(N) 0(N) RAI counts(exceeded) 0(N) 0(N) RAI counts(exceeded) 0(N) 0(N)
interval 1 0
interval 1 0 interval 1 0 interval 1 0
AIS counts(exceeded) 0(N) 0(N)
AIS counts(exceeded) 0(N) 0(N) AIS counts(exceeded) 0(N) 0(N) AIS counts(exceeded) 0(N) 0(N)
interval 1 0
interval 1 0 interval 1 0 interval 1 0
BPV counts(exceeded) 0(N) 0(N)
BPV counts(exceeded) 0(N) 0(N) BPV counts(exceeded) 0(N) 0(N) BPV counts(exceeded) 0(N) 0(N)
interval 1 0
interval 1 0 interval 1 0 interval 1 0
ES 15min counts(exceeded) 0(N) 0(N)
ES 15min counts(exceeded) 0(N) 0(N) ES 15min counts(exceeded) 0(N) 0(N) ES 15min counts(exceeded) 0(N) 0(N)
ES 24hr counts(exceeded) 0(N) 0(N)
ES 24hr counts(exceeded) 0(N) 0(N) ES 24hr counts(exceeded) 0(N) 0(N) ES 24hr counts(exceeded) 0(N) 0(N)
SES 15min counts(exceeded) 0(N) 0(N)
SES 15min counts(exceeded) 0(N) 0(N) SES 15min counts(exceeded) 0(N) 0(N) SES 15min counts(exceeded) 0(N) 0(N)
SES 24hr counts(exceeded) 1157(N) 0(N)
SES 24hr counts(exceeded) 1157(N) 0(N) SES 24hr counts(exceeded) 1157(N) 0(N) SES 24hr counts(exceeded) 1157(N) 0(N)
X) exit this screen
X) exit this screen X) exit this screen X) exit this screen
[1,1] DIDCSU 2912 >
[1,1] DIDCSU 2912 > [1,1] DIDCSU 2912 > [1,1] DIDCSU 2912 >
-- DIDCSU 2912 NET PORT ALARM MENU -- -- DIDCSU 2912 NET PORT ALARM MENU -- -- DIDCSU 2912 NET PORT ALARM MENU -- -- DIDCSU 2912 NET PORT ALARM MENU --
N) NMS Address 128.0.0.0 N) NMS Address 128.0.0.0 N) NMS Address 128.0.0.0 N) NMS Address 128.0.0.0
A) Card Alarm Reporting NO
A) Card Alarm Reporting NO A) Card Alarm Reporting NO A) Card Alarm Reporting NO
C) Configure Thresholds S) Alarm status C) Configure Thresholds S) Alarm status C) Configure Thresholds S) Alarm status C) Configure Thresholds S) Alarm status
O) Display Alarm Buffer Tn) Set Default Thresholds
O) Display Alarm Buffer Tn) Set Default Thresholds O) Display Alarm Buffer Tn) Set Default Thresholds O) Display Alarm Buffer Tn) Set Default Thresholds
X) exit this screen
X) exit this screen X) exit this screen X) exit this screen
A [0.0.0.204] [1,2] DIDCSU 2912 > A [0.0.0.204] [1,2] DIDCSU 2912 > A [0.0.0.204] [1,2] DIDCSU 2912 > A [0.0.0.204] [1,2] DIDCSU 2912 >