Verilink DIDCSU 2912 (880-502646-001) Product Manual - Manual (Page 33)

DIDCSU 2912 Quick Set-Up
Verilink DIDCSU 2912 User Manual 2
-
15
Figure 2-17 Configuration Menu
12. From the Configuration Menu ( Figure 2-17 ), select option “P”
to access the E1 Port Configuration Menu ( Figure 2-18 ).
Figure 2-18 E1 Port Configuration Menu
Place Ports In
Service
13. In the E1 Port Configuration Menu, type the letter “I”, and the
number “1”, then press E NTER , then type “Y”and press E NTER , to
place Net Port 1 In Service. Type “
I
2”, press E NTER , then
respond by pressing “Y”, E NTER , to place Net Port 2 In Service.
NOTE: For the remainder of this chapter you will not be instructed
each time you should press the E NTER key. In general, E NTER is
used after each command or text entry.
Select CRC-4 14. Type “E1”, and select “Y” to enable CRC-4 error detection for
Net Port 1. Type “E2”, and select “Y” to enable CRC-4 error
detection for Net Port 2.
Select Carrier
Failure Alarm
15. Type “F1”, then “Y” to select Carrier Failure as an alarm
condition reported by Net Port 1. Type “F2”, then “Y” to select
Carrier Failure for Net Port 2.
-- DIDCSU 2912 CONFIGURATION MENU -- -- DIDCSU 2912 CONFIGURATION MENU -- -- DIDCSU 2912 CONFIGURATION MENU -- -- DIDCSU 2912 CONFIGURATION MENU --
P) E1 port D) data port P) E1 port D) data port P) E1 port D) data port P) E1 port D) data port
X) exit this screen
X) exit this screen X) exit this screen X) exit this screen
A [0.0.0.204] [1,2] DIDCSU 2912 > A [0.0.0.204] [1,2] DIDCSU 2912 > A [0.0.0.204] [1,2] DIDCSU 2912 > A [0.0.0.204] [1,2] DIDCSU 2912 >
-- DIDCSU 2912 E1 PORT CONFIGURATION MENU -- -- DIDCSU 2912 E1 PORT CONFIGURATION MENU -- -- DIDCSU 2912 E1 PORT CONFIGURATION MENU -- -- DIDCSU 2912 E1 PORT CONFIGURATION MENU --
PORT 1 PORT 2 PORT 1 PORT 2 PORT 1 PORT 2 PORT 1 PORT 2
In) In Service NO NO In) In Service NO NO In) In Service NO NO In) In Service NO NO
En) CRC4 NO NO
En) CRC4 NO NO En) CRC4 NO NO En) CRC4 NO NO
Fn) Carrier Failure Alarm NO NO
Fn) Carrier Failure Alarm NO NO Fn) Carrier Failure Alarm NO NO Fn) Carrier Failure Alarm NO NO
Sn) FASE Alarm Category MINOR MINOR
Sn) FASE Alarm Category MINOR MINOR Sn) FASE Alarm Category MINOR MINOR Sn) FASE Alarm Category MINOR MINOR
Mn) Frame Mode 31 CHANNEL 31 CHANNEL
Mn) Frame Mode 31 CHANNEL 31 CHANNEL Mn) Frame Mode 31 CHANNEL 31 CHANNEL Mn) Frame Mode 31 CHANNEL 31 CHANNEL
Nn) Alarm Declare Time(sec) 0 0
Nn) Alarm Declare Time(sec) 0 0 Nn) Alarm Declare Time(sec) 0 0 Nn) Alarm Declare Time(sec) 0 0
Bn) Enable Inband NO NO
Bn) Enable Inband NO NO Bn) Enable Inband NO NO Bn) Enable Inband NO NO
Ln) Inband Timeslot 0 0
Ln) Inband Timeslot 0 0 Ln) Inband Timeslot 0 0 Ln) Inband Timeslot 0 0
C) CPE Side DIDCSU: NO C) CPE Side DIDCSU: NO C) CPE Side DIDCSU: NO C) CPE Side DIDCSU: NO
T) timing
T) timing T) timing T) timing
X) exit this screen
X) exit this screen X) exit this screen X) exit this screen
A [0.0.0.204] [1,2] DIDCSU 2912 > A [0.0.0.204] [1,2] DIDCSU 2912 > A [0.0.0.204] [1,2] DIDCSU 2912 > A [0.0.0.204] [1,2] DIDCSU 2912 >