Verilink DIDCSU 2912 (880-502646-001) Product Manual - Manual (Page 68)

DIDCSU T1 Version
3-28 Verilink DIDCSU 2912 User Manual
Figure 3-19 Net Port Alarm Threshold Configuration Menu
NOTE: To disable any or all alarm conditions, enter a threshold
value of 0. To enable a condition, specify any non-zero
threshold value. The interval must be greater than or equal
to the threshold value.
Table 3-14 Net Port Alarm Threshold Configuration Menu Parameters
Command Description Options
Pn Alarm Reporting: Enabling alarm reporting conveys any messages
indicating alarms for each port. These alarms are declared to both the
Craft interface as well as Node Manager (if used). If this option is set to
No, even if alarm reports for individual ports are requested, they cannot
be reported. The LEDs turn amber or red in an alarm condition. Set this
option to No when configuring the node. Set to Yes during normal
operation.
Yes or No
(Y/N)
Fn Loss-of-Frame (LOF) Threshold/LOF Interval: Use this option to indicate a
monitoring interval that is greater than the errored-second threshold for
Loss-of-Frame errors.
Threshold:
1—86400
0 to disable
Interval:
3—86400
seconds
Ln Loss-of-Signal (LOS) Threshold/LOS Interval: Use this option to indicate a
monitoring interval that is greater than the threshold.
If LOS occurs, troubleshoot this situation first and ignore all other
alarms. (There will be other alarms.) This is the most severe alarm.
Threshold:
1—86400
0 to disable
Interval:
3—86400
seconds
-- DIDCSU 2912 NET PORT ALARM THRESHOLD CONFIGURATION MENU -- -- DIDCSU 2912 NET PORT ALARM THRESHOLD CONFIGURATION MENU -- -- DIDCSU 2912 NET PORT ALARM THRESHOLD CONFIGURATION MENU -- -- DIDCSU 2912 NET PORT ALARM THRESHOLD CONFIGURATION MENU --
PORT 1 PORT 2
PORT 1 PORT 2 PORT 1 PORT 2 PORT 1 PORT 2
Pn) Alarm Reporting YES YES
Pn) Alarm Reporting YES YES Pn) Alarm Reporting YES YES Pn) Alarm Reporting YES YES
Fn) LOF threshold 3 3
Fn) LOF threshold 3 3 Fn) LOF threshold 3 3 Fn) LOF threshold 3 3
LOF interval 3 3
LOF interval 3 3 LOF interval 3 3 LOF interval 3 3
Ln) LOS threshold 3 3
Ln) LOS threshold 3 3 Ln) LOS threshold 3 3 Ln) LOS threshold 3 3
LOS interval 3 3
LOS interval 3 3 LOS interval 3 3 LOS interval 3 3
Rn) RAI threshold 1 1
Rn) RAI threshold 1 1 Rn) RAI threshold 1 1 Rn) RAI threshold 1 1
RAI interval 1 1
RAI interval 1 1 RAI interval 1 1 RAI interval 1 1
An) AIS threshold 1 1
An) AIS threshold 1 1 An) AIS threshold 1 1 An) AIS threshold 1 1
AIS interval 1 1
AIS interval 1 1 AIS interval 1 1 AIS interval 1 1
Bn) BPV threshold 1 1
Bn) BPV threshold 1 1 Bn) BPV threshold 1 1 Bn) BPV threshold 1 1
BPV interval 1 1
BPV interval 1 1 BPV interval 1 1 BPV interval 1 1
En) ES 15min threshold 900 900
En) ES 15min threshold 900 900 En) ES 15min threshold 900 900 En) ES 15min threshold 900 900
ES 24hr threshold 86400 86400
ES 24hr threshold 86400 86400 ES 24hr threshold 86400 86400 ES 24hr threshold 86400 86400
Sn) SES 15min threshold 900 900
Sn) SES 15min threshold 900 900 Sn) SES 15min threshold 900 900 Sn) SES 15min threshold 900 900
SES 24hr threshold 86400 86400
SES 24hr threshold 86400 86400 SES 24hr threshold 86400 86400 SES 24hr threshold 86400 86400
In) BER threshold DISABLE DISABLE
In) BER threshold DISABLE DISABLE In) BER threshold DISABLE DISABLE In) BER threshold DISABLE DISABLE
X) exit this screen
X) exit this screen X) exit this screen X) exit this screen
[1,1] DIDCSU 2912 >
[1,1] DIDCSU 2912 > [1,1] DIDCSU 2912 > [1,1] DIDCSU 2912 >