Bus compatibility, Bus compatibility -3 – Verilink DIDCSU 2912 (880-502646-001) Product Manual User Manual

Page 21

DIDCSU 2912 Quick Set-Up

Verilink DIDCSU 2912 User Manual

Bus

Compatibility

3. If there is no indication of the DIDCSU in the shelf/slot map on

the NCM Main Menu, examine the SYS LED on the DIDCSU. If it
is blinking green-to-off, the DIDCSU is using a different shelf
midplane bus than the NCM.
NCMs are shipped with the C bus as the default bus. Other
modules are shipped with the A bus as a default.

To assign the DIDCSU to the same bus as the NCM proceed to
Step 4.

4. Temporarily connect the Craft cable to the

LOCAL

port on the

DIDCSU module. Press

ENTER

5. If no pSH+> prompt is displayed, go to Step 6. If the prompt

pSH+> is displayed, type “craft” and press

ENTER

. Be sure to use

lowercase characters.

6. At the YOUR PASSWORD? prompt, press E

NTER

. The DIDCSU

Main Menu is displayed.

Figure 2-3 DIDCSU Main Menu

7. From the DIDCSU Main Menu, select the letter “O” for Node

Administration, then “B” to Change ACP Bus.
Observe that the current ACP bus selection is indicated.
Change the ACP bus selection to the other value (A or C).

-- VERILINK ACE CONTROLLER at [1,2]: FW Rev 3.02, Apr 20 1999 --

Site Name:

Site Name:
Access level: 4

Access level: 4

Access level: 4
<- SLOT ->

<- SLOT ->

<- SLOT ->
SHELF 1 2 3 4 5 6 7 8 9 10 11 12 13

SHELF 1 2 3 4 5 6 7 8 9 10 11 12 13

SHELF 1 2 3 4 5 6 7 8 9 10 11 12 13
0 - - - - - - - - - - - - -

0 - - - - - - - - - - - - -

0 - - - - - - - - - - - - -
1 M *N [A] - - - - - - - - - - -

1 M *N [A] - - - - - - - - - - -

1 M *N [A] - - - - - - - - - - -
2 - - - - - - - - - - - - -

2 - - - - - - - - - - - - -

2 - - - - - - - - - - - - -
3 - - - - - - - - - - - - -

3 - - - - - - - - - - - - -

3 - - - - - - - - - - - - -
4 - - - - - - - - - - - - -

4 - - - - - - - - - - - - -

4 - - - - - - - - - - - - -
5 - - - - - - - - - - - - -

5 - - - - - - - - - - - - -

5 - - - - - - - - - - - - -
6 - - - - - - - - - - - - -

6 - - - - - - - - - - - - -

6 - - - - - - - - - - - - -
7 - - - - - - - - - - - - -

7 - - - - - - - - - - - - -

7 - - - - - - - - - - - - -
KEY: *=CONTROLLER N=NCM Q=QUAD M=IMUX A=DIDCSU P=DPRI X=QPRI U=DCSU

KEY: *=CONTROLLER N=NCM Q=QUAD M=IMUX A=DIDCSU P=DPRI X=QPRI U=DCSU

S) shelf/slot O) node administration

S) shelf/slot O) node administration
C) configuration D) diagnostics

C) configuration D) diagnostics

C) configuration D) diagnostics
P) performance/status A) alarm

P) performance/status A) alarm

P) performance/status A) alarm
B) circuit I) manufacturing info

B) circuit I) manufacturing info

B) circuit I) manufacturing info
X) system log off

X) system log off

[1,2] DIDCSU 2912 >