Verilink DIDCSU 2912 (880-502646-001) Product Manual - Manual (Page 20)

DIDCSU 2912 Quick Set-Up
2-2 Verilink DIDCSU 2912 User Manual
Terminal
Parameters
Set your terminal, or terminal program, to
• 19.2 kbit/s
• 8 data bits
• no parity
• one stop bit
• no flow control
Logging On 1. Press E NTER . The pSH+> prompt is displayed. Type “craft” and
press E NTER .
2. A password prompt appears. Initially there is no password,
press E NTER to display the NCM Main Menu.
If the NCM Main Menu display ( Figure 2-2) shows the DIDCSU in the
proper shelf/slot position (letter A in slot 2), go to Step 10 .
Figure 2-2 NCM Main Menu
-- VERILINK NCM CONTROLLER : FW Rev 4.33, May 18 1999 11:10:17 -- -- VERILINK NCM CONTROLLER : FW Rev 4.33, May 18 1999 11:10:17 -- -- VERILINK NCM CONTROLLER : FW Rev 4.33, May 18 1999 11:10:17 -- -- VERILINK NCM CONTROLLER : FW Rev 4.33, May 18 1999 11:10:17 --
Site Name: Tech Pubs & Trainin Access Level: 2 Site Name: Tech Pubs & Trainin Access Level: 2 Site Name: Tech Pubs & Trainin Access Level: 2 Site Name: Tech Pubs & Trainin Access Level: 2
Managing at NEAR end node [0.0.0.204] Node ID: 204
Managing at NEAR end node [0.0.0.204] Node ID: 204 Managing at NEAR end node [0.0.0.204] Node ID: 204 Managing at NEAR end node [0.0.0.204] Node ID: 204
<- SLOT -> <- SLOT -> <- SLOT -> <- SLOT ->
SHELF 1 2 3 4 5 6 7 8 9 10 11 12 13
SHELF 1 2 3 4 5 6 7 8 9 10 11 12 13 SHELF 1 2 3 4 5 6 7 8 9 10 11 12 13 SHELF 1 2 3 4 5 6 7 8 9 10 11 12 13
0 - - - - - - - - - - - - -
0 - - - - - - - - - - - - - 0 - - - - - - - - - - - - - 0 - - - - - - - - - - - - -
1 D [*N] A
1 D [*N] A 1 D [*N] A 1 D [*N] A
2 - - - - - - - - - - - - -
2 - - - - - - - - - - - - - 2 - - - - - - - - - - - - - 2 - - - - - - - - - - - - -
3 - - - - - - - - - - - - -
3 - - - - - - - - - - - - - 3 - - - - - - - - - - - - - 3 - - - - - - - - - - - - -
4 - - - - - - - - - - - - -
4 - - - - - - - - - - - - - 4 - - - - - - - - - - - - - 4 - - - - - - - - - - - - -
KEY: A=didcsu B=diu/dbu C=csu D=diu E=sdiu F=diu/dds G=dhdm
KEY: A=didcsu B=diu/dbu C=csu D=diu E=sdiu F=diu/dds G=dhdm KEY: A=didcsu B=diu/dbu C=csu D=diu E=sdiu F=diu/dds G=dhdm KEY: A=didcsu B=diu/dbu C=csu D=diu E=sdiu F=diu/dds G=dhdm
H=atm/imux I=idcsu J=pep K=dac L=hlm M=imux N=ncm
H=atm/imux I=idcsu J=pep K=dac L=hlm M=imux N=ncm H=atm/imux I=idcsu J=pep K=dac L=hlm M=imux N=ncm H=atm/imux I=idcsu J=pep K=dac L=hlm M=imux N=ncm
P=dpri Q=quad R=subrate S=hsm T=hdm U=dcsu
P=dpri Q=quad R=subrate S=hsm T=hdm U=dcsu P=dpri Q=quad R=subrate S=hsm T=hdm U=dcsu P=dpri Q=quad R=subrate S=hsm T=hdm U=dcsu
V=vcu W= dhdm_poet X=qpri ?=unknown
V=vcu W= dhdm_poet X=qpri ?=unknown V=vcu W= dhdm_poet X=qpri ?=unknown V=vcu W= dhdm_poet X=qpri ?=unknown
S) shelf/slot O) administration S) shelf/slot O) administration S) shelf/slot O) administration S) shelf/slot O) administration
C) configuration D) diagnostics
C) configuration D) diagnostics C) configuration D) diagnostics C) configuration D) diagnostics
P) performance/status A) alarm
P) performance/status A) alarm P) performance/status A) alarm P) performance/status A) alarm
B) circuit manager I) manufacturing info
B) circuit manager I) manufacturing info B) circuit manager I) manufacturing info B) circuit manager I) manufacturing info
X) exit this screen
X) exit this screen X) exit this screen X) exit this screen
A [0.0.0.204] [1,1] NCM 2000 > A [0.0.0.204] [1,1] NCM 2000 > A [0.0.0.204] [1,1] NCM 2000 > A [0.0.0.204] [1,1] NCM 2000 >