Verilink DIDCSU 2912 (880-502646-001) Product Manual - Manual (Page 44)

DIDCSU T1 Version
3-4 Verilink DIDCSU 2912 User Manual
DIDCSU 2912 Main Menu Parameters
Once the DIDCSU module has been selected, the Main Menu
commands pertain to that module. The following commands are
available on the Main Menu:
Figure 3-2 NCM Main Menu
Table 3-2 Main Menu Commands
-- VERILINK NCM CONTROLLER : FW Rev 4.33, May 18 1999 11:10:17 -- -- VERILINK NCM CONTROLLER : FW Rev 4.33, May 18 1999 11:10:17 -- -- VERILINK NCM CONTROLLER : FW Rev 4.33, May 18 1999 11:10:17 -- -- VERILINK NCM CONTROLLER : FW Rev 4.33, May 18 1999 11:10:17 --
Site Name: Tech Pubs & Trainin Access Level: 2 Site Name: Tech Pubs & Trainin Access Level: 2 Site Name: Tech Pubs & Trainin Access Level: 2 Site Name: Tech Pubs & Trainin Access Level: 2
Managing at NEAR end node [0.0.0.204] Node ID: 204
Managing at NEAR end node [0.0.0.204] Node ID: 204 Managing at NEAR end node [0.0.0.204] Node ID: 204 Managing at NEAR end node [0.0.0.204] Node ID: 204
<- SLOT -> <- SLOT -> <- SLOT -> <- SLOT ->
SHELF 1 2 3 4 5 6 7 8 9 10 11 12 13
SHELF 1 2 3 4 5 6 7 8 9 10 11 12 13 SHELF 1 2 3 4 5 6 7 8 9 10 11 12 13 SHELF 1 2 3 4 5 6 7 8 9 10 11 12 13
0 - - - - - - - - - - - - -
0 - - - - - - - - - - - - - 0 - - - - - - - - - - - - - 0 - - - - - - - - - - - - -
1 D [*N] A
1 D [*N] A 1 D [*N] A 1 D [*N] A
2 - - - - - - - - - - - - -
2 - - - - - - - - - - - - - 2 - - - - - - - - - - - - - 2 - - - - - - - - - - - - -
3 - - - - - - - - - - - - -
3 - - - - - - - - - - - - - 3 - - - - - - - - - - - - - 3 - - - - - - - - - - - - -
4 - - - - - - - - - - - - -
4 - - - - - - - - - - - - - 4 - - - - - - - - - - - - - 4 - - - - - - - - - - - - -
KEY: A=didcsu B=diu/dbu C=csu D=diu E=sdiu F=diu/dds G=dhdm
KEY: A=didcsu B=diu/dbu C=csu D=diu E=sdiu F=diu/dds G=dhdm KEY: A=didcsu B=diu/dbu C=csu D=diu E=sdiu F=diu/dds G=dhdm KEY: A=didcsu B=diu/dbu C=csu D=diu E=sdiu F=diu/dds G=dhdm
H=atm/imux I=idcsu J=pep K=dac L=hlm M=imux N=ncm
H=atm/imux I=idcsu J=pep K=dac L=hlm M=imux N=ncm H=atm/imux I=idcsu J=pep K=dac L=hlm M=imux N=ncm H=atm/imux I=idcsu J=pep K=dac L=hlm M=imux N=ncm
P=dpri Q=quad R=subrate S=hsm T=hdm U=dcsu
P=dpri Q=quad R=subrate S=hsm T=hdm U=dcsu P=dpri Q=quad R=subrate S=hsm T=hdm U=dcsu P=dpri Q=quad R=subrate S=hsm T=hdm U=dcsu
V=vcu W= dhdm_poet X=qpri ?=unknown
V=vcu W= dhdm_poet X=qpri ?=unknown V=vcu W= dhdm_poet X=qpri ?=unknown V=vcu W= dhdm_poet X=qpri ?=unknown
S) shelf/slot O) administration S) shelf/slot O) administration S) shelf/slot O) administration S) shelf/slot O) administration
C) configuration D) diagnostics
C) configuration D) diagnostics C) configuration D) diagnostics C) configuration D) diagnostics
P) performance/status A) alarm
P) performance/status A) alarm P) performance/status A) alarm P) performance/status A) alarm
B) circuit manager I) manufacturing info
B) circuit manager I) manufacturing info B) circuit manager I) manufacturing info B) circuit manager I) manufacturing info
X) exit this screen
X) exit this screen X) exit this screen X) exit this screen
A [0.0.0.204] [1,1] NCM 2000 > A [0.0.0.204] [1,1] NCM 2000 > A [0.0.0.204] [1,1] NCM 2000 > A [0.0.0.204] [1,1] NCM 2000 >
Command Description
S Shelf/Slot: A shelf can be Multiline, Quintline or Dual-line. You can navigate from one card
to another if they are mounted in a shelf.
O Administration, Figure 3-3
C Configuration, Figure 3-4
D Diagnostics, Figure 3-11
P Performance/Status Figure 3-16
A Alarm, Figure 3-19
B Circuit Building, Figure 3-22
I Manufacturing Info, Figure 3-23
X System Log Off