Teac X-48MKII - Manual (Page 56)

56
TASCAM X-48MKII
Main unit settings menu Description
PREF
Auto Chase Turn Auto Chase mode ON/OFF
One Button Record Enable recording with just the record button
One Button Rehearse Enable activating rehearsal mode with just the rehearsal button
Update Punch Points
Set whether or not punch-in and punch-out point settings are
automatically updated when starting and stopping recording
Track Key Punch Set whether REC keys 1-48 can be used to punch-in and punch-out
Use Pre/Post-Roll Turn pre-roll and post-roll ON/OFF
Pre-Roll Set the pre-roll time
Post-Roll Set the post-roll time
TimeCode Display Set the time axis display unit
Mixer Bypass Turn mixer bypass mode ON/OFF
Loop Mode Select the loop playback method
AES 2X Mode
Set the AES/EBU card transmission mode when using 2x sampling
frequencies.
S/PDIF Input SRC Turn the S/PDIF input sampling rate converter ON/OFF
S/PDIF Pro Mode Set the S/PDIF input professional mode
Auto Input Select the auto input mode
Punch Crossfade Set the crossfade time when punch recording
EDL Crossfade Shape Set the EDL crossfade shape type
Overload LED Time Set how long the (overload) indicator lights
Audio File Naming Set how names are given automatically to audio clips
Auto Save Turn the EDL automatic saving function ON/OFF
Auto Save Time
Set the time interval between when saving when using EDL automatic
saving
P2 Track Arm Set whether or not tracks can be armed over the Sony 9-pin connection
P2 Punch Delay
Set the amount of delay until execution after receiving a punch-in
command over the Sony 9-pin connection
P2 Chase Control
Set the target chase source (LTC or MMC) when commanded to chase
from the Sony 9-pin port.
Meters Make various meter display settings
Looping Turn loop playback ON/OFF
Scrolling Set track screen scrolling
Load Last Project
Set whether or not to load the project that was in use the last time the
unit was shut down
SYS
Settings View and save system settings
Midi Device ID Set the MIDI device ID
Network Make various address settings for the LAN network
About Show the software version
9 – Appendix