Teac X-48MKII - Manual (Page 54)

54
TASCAM X-48MKII
Front panel function list
Front panel Description
Track meter 1-48 Show each track’s signal level (−60 dBFS - 1 dBFS) and overload status
REC LED 1-48 Show each track’s record arming status
REC key 1-48 Use to arm each track for recording.
STATUS indicator
ERROR indicator Blinks when a system error occurs
BUSY indicator Blinks when the system is busy
MIDI indicator Lights when a MIDI command is input
DISK indicator Lights when the built-in hard disk is being accessed
SAMPLE RATE indicator Shows the currently selected sampling frequency
TIME CODE indicator Shows the currently selected frame rate
SYSTEM indicator
SAMPLE LOCK indicator
When syncing to an external clock source, lights when the unit is locked
and blinks when not locked
DEST REC indicator Lights when in destructive (“tape”) mode
VARISPEED indicator Lights when varispeed is enabled
STANDBY/ON switch
Turn unit (power) on and puts it into standby; press and hold for several
seconds to force the unit into standby
Built-in DVD drive Use DVD discs to backup and restore projects and import and export files
Transport button Operate the recorder transport
Display Use to view information and settings
ENTER/YES button
Use to confirm and execute items and move down levels in the settings
menu
EXIT/NO button
Use to cancel operations and settings and move up levels in the settings
menu
CHNG button Change setting items
CLEAR/HOME button Use to clear a setting or return to the LCD home position
5 /b button
Moves the cursor. When SHIFT is active, sets punch-in and punch-out
points
TC CHASE button Turn the timecode synchronization function ON/OFF
ALL SAFE/REC button
When SHIFT is not active, use to prevent/allow recording on all tracks.
When SHIFT is active, use to put all tracks into recording standby or take
them out of standby.
AUTO/ALL INPUT button
When SHIFT is not active, use to turn Auto Input mode ON/OFF. When
SHIFT is active, use to set input monitoring of all tracks.
SHIFT button
Turn SHIFT ON/OFF. To use the shift function of buttons that have one,
When the SHIFT button is lit, press the button with the shift function •
While pressing and holding the SHIFT button, press the button with the •
shift function
PROJ button
Open the PROJ menu where you can create, open, save, erase and copy
projects
DISK button
Open the DISK menu where you can check the open space on the built-in
hard disk and format it
INP 1-24 button Open the input settings menu for tracks 1-24
INP 25-48 button Open the input settings menu for tracks 25-48
EXT MNT/UNMNT button Mount and unmount USB external storage devices
SYNC button
Open the synchronization settings menu where you can set sampling
frequency, clock source and other audio synchronization and timecode
synchronization settings
PREF button Open a menu where you can set various preferences
SYS button
Open the system settings screen where you can save and recall system
settings, as well as make MIDI and network settings
9 – Appendix