RLE Protocol Converter V.2.4 - Manual (Page 67)

rletech.com Protocol Converter User Guide 67
A
P P E N D I X
C HAPTER 0
T
ROUBLESHOOTING
Problem Action
Control Panel will not Power
Up
1 Check with a DVM (Digital Volt Meter) for AC or DC
input power on the lower left hand terminal block on the
Protocol Converter. If no voltage is present at terminal
block, check the circuit breaker or power supply that
powers the Protocol Converter.
2 If voltage is present contact RLE Technologies for
further troubleshooting.
Table B.1 Troubleshooting the Protocol Converter