RLE Protocol Converter V.2.4 - Manual (Page 41)

rletech.com Protocol Converter User Guide 41
3
Configuration
You can also click the First, <
registers.
Figure 3.18 Register Configuration Navigation
4 Write a specific value to an SNMP register by clicking the SNMP Set Register link on the
individual register pages.
Figure 3.19 SNMP Set Register Link
When you click this link, the SNMP Set Register webpage displays.
Figure 3.20 SNMP New Value Field
5 Enter the new value for the register in the New Value box and click the Submit Changes
button.
Click the Return link to go back to the register configuration page.