2 rj45 ethernet connection, Rj45 ethernet connection, Figure 2.3 – RLE Protocol Converter V.2.4 User Manual
Page 17: Figure 2.4, Direct connection, Subnet connection
rletech.com
Protocol Converter User Guide
17
2
Installation
2.3.2 RJ45 Ethernet Connection
The Protocol Converter has an internal 10/100BaseT Ethernet port used to configure the
Protocol Converter. The Ethernet port supports Web browser access, BACnet, Modbus,
SNMP, and SMTP (email).
Direct Connection
To make a direct connection between the Protocol Converter and a computer or laptop using
the crossover cable - the blue cable with yellow connectors provided with the device.
Figure 2.3
Protocol Converter Ethernet Connection to a PC Using a Crossover Cable
Subnet Connection
To connect the Protocol Converter on a subnet using a hub or switch and straight-through
CAT5 cables, see
.
Figure 2.4
Protocol Converter Ethernet Connection to a PC on a Subnet