RLE Protocol Converter V.2.4 - Manual (Page 15)

rletech.com Protocol Converter User Guide 15
C
H A P T E R
C HAPTER 0
I
NSTALLATION
2.1. Register the Protocol Converter
Go to http://www.rletech.com/ and enter the requested information in the Product Registration
form. Submit the form to register your product.
2.2. Mount the Protocol Converter
The Protocol Converter comes with mounting brackets to allow the unit to be installed in a
19-inch (0.48m) rack.
1 Using the screws provided, attach the mounting brackets to the sides of the device.
Figure 2.1 Protocol Converter with Mounting Brackets
NOTE The brackets can be reversed so the other side of the Protocol Converter is facing outward.
2 Install the Protocol Converter in the rack.
3 Use the proper anchoring method to mount the Protocol Converter securely in the rack.