RLE LD5100 - Manual (Page 43)

www.rletech.com 43 970.484.6510
C
H A P T E R
C HAPTER 0
EIA-232 I
NTERFACE
The EIA-232 Interface is used primarily for advanced diagnostic and configuration.
The Bootloader section is designed for experienced technicians or users
responsible for maintaining the system. EXIT IMMEDIATELY if you are not
trained in the use of the Bootloader commands.
Contact the manufacturer for more information regarding the commands in this
section.
7.1. Boot Up
Make sure the EIA-232 port is connected to a PC or terminal with a straight through cable (not
provided). Run terminal emulation software (i.e., HyperTerminal) and make sure the settings
match the LD5100 EIA-232 port configuration; see 2.1.7, “RS232 Connector” on page 21 for
port configuration details. When the LD5100 is powered up, diagnostics are performed. The
boot ROM and flash program code are verified. Output similar to Figure 7.1 should appear on
the terminal or terminal emulation software.
W
ARNING