RLE LD5100 - Manual (Page 39)

www.rletech.com 39 970.484.6510
5 LCD Interface
5.9. Zone Setup
The Zone Setup menu will display a table of configured zones. A zone is a set length of cable
that may have a name or description assigned to it. Upon alarm, if a leak distance falls within a
zone’s boundary, the zone's description will appear on the main screen. Zones are configured
by entering the starting distance for the zone, followed by the zone label. The zone’s end
boundary is set by the next zone's starting distance.
Figure 5.9 Example Configuration for Zone 1
Note Zone 1 starts at 0 feet/meters and ends at Zone 2’s starting distance.
Figure 5.10 is an example of the main screen during a leak at 500 feet (152.4m), in Zone 1,
labeled Server Room.
Figure 5.10 Example of the Main Screen during a Specific Condition