RLE LD5100 - Manual (Page 37)

www.rletech.com 37 970.484.6510
5 LCD Interface
5.8.1 Leak Trip Point
The Leak Trip Point option allows users to modify the leak detection trip point for the LD5100.
This trip point helps the system avoid false alarm readings.
5.8.2 Contamination Trip Point
The Contamination Trip Point option allows users to modify the contamination trip point for
the LD5100. This trip point helps the system avoid false alarm readings.
5.8.3 Leak Delay
The Leak Delay is a timer that begins to count down when a leak alarm condition is met. This
timer delays the alarm from registering for a set amount of time. The timer can be set from 5 to
990 seconds.
5.8.4 Contamination Delay
The Contamination Delay is a timer that begins to count down when a leak alarm condition is
met. This timer delays the alarm from registering for a set amount of time. The timer can be set
from 5 to 990 seconds.
5.8.5 Re-Alarm Delay
The Re-Alarm Delay is a counter that, upon expiring, will re-annunciate the last silenced alarm
condition. This counter can be set from 0 (disable) to 24 hours.
5.8.6 Latching Alarms
The Latching Alarms option allows the alarm relays to be set as latching or non-latching. A
latched alarm requires a manual reset of the system once a leak or cable problem is no longer
present.
5.8.7 Supervised Relays
The Supervised Relays option allows users to configure the Leak and Fault relays to be
supervised or unsupervised. A supervised relay is normally activated and will deactivate upon
alarm or loss of power.
5.8.8 4-20MA Max Range
The 4-20mA Max Range allows the user to select the cable range for the 4-20mA output. This
value can be set to 1000, 2500, or 5000 feet (305m, 762m, and 1524m).
5.8.9 Feet / Meters
The Feet/Meters option designates whether the LD5100's distance readings are displayed in
feet or meters.