10 ac power input, Ac power input, Figure 2.3 – RLE LD5100 User Manual
Page 23
www.rletech.com
23
970.484.6510
2
Connections and Settings
2.1.10 AC Power Input
The LD5100 mounted in the metal enclosure requires either a 120 VAC (105-125 VAC) or
230 VAC (205-250 VAC) connection (2 wire & ground). Connect the ground and power wires
to the AC power terminal block. Connect the AC power input as follows:
AC Power Block TB1-1Neutral
AC Power Block TB1-2Line
AC Power Block TB1-3Ground
Figure 2.3 AC Power Input
Make sure the dedicated breaker is in the off position before connecting the AC
power wires to the LD5100.
W
ARNING