QuickLabel 200 Kiaro! - Manual (Page 95)

Kiaro! 200 Maintenance Utility
Kiaro! 200 User Guide 81
3 Choose TOF Threshold Adjustment . The Threshold Adjustment window will
open.
4 To read the internal sensor value from the printer and set the Internal Sensor
control accordingly, choose Read From Printer .
5 Enter an adjustment based on the error message table above.
6 Choose Write to Printer . The threshold settings will be saved.
Related Topics:
- Turning On Auto-Calibration on page 81
Turning On Auto-Calibration
If the top-of-form sensor threshold has been adjusted in the Threshold Adjustment
window, the printer will use the adjusted calibration value.
Use the auto-calibration feature to disable this adjustment and return the printer to the
default automatic calibration mode.
1 Launch the Kiaro! 200 Maintenance Utility.
From the Windows Start Menu, choose Start > All Programs > QuickLabel
Kiaro! 200 > Kiaro! 200 Maintenance Utility . A language and printer prompt will
open.
Select a display language and the Kiaro! 200 printer you want to connect to.
Choose
OK .
2 Choose the Adjustments tab.
3
Choose
Turn Auto-Calibration On
. Top-of-form sensor threshold adjustments
will be cleared and automatic calibration will be enabled.
Related Topics:
- Adjusting the Top-of-Form Threshold on page 80
Adjusting the Density
Use this adjustment if you notice color density differences between the areas printed
by each printhead.
1 Ensure that 8.35 x 6.1 in. (212 x 155 mm) media is loaded.