QuickLabel 200 Kiaro! - Manual (Page 75)

Kiaro! 200 Maintenance Utility
Kiaro! 200 User Guide 61
Cleaning Tab
Use the Cleaning tab to clean the printheads, prepare the printer for transport, and
prime the printheads. If you are using the Kiaro! 200D printer, use this tab to refresh
ink.
Cleaning Printheads
If you suspect print quality issues related to banding, clogged nozzles, or printing
defects, you might want to initiate a cleaning.
Printhead cleaning cannot be done during a print job or if an error is occurring. When
cleaning is in progress, do not perform any other operation.
Note: Cleaning the printhead consumes ink. Clean the printhead only when necessary.
The cleaning options discussed in this procedure are also available in the Status tab of
the Kiaro! 200 printer driver and the Cleaning menu of the Kiaro! 200 Status Monitor.
1 Launch the Kiaro! 200 Maintenance Utility.
From the Windows Start Menu, choose Start > All Programs > QuickLabel
Kiaro! 200 > Kiaro! 200 Maintenance Utility . A language and printer prompt will
open.
Select a display language and the Kiaro! 200 printer you want to connect to.
Choose
OK .
2 Choose the Cleaning tab.