OpenEye CM-511 - Manual (Page 41)

29246AC 41
THRESHOLD
The dome will remove the filter immediately when the threshold value is reached. The threshold options
are , and . threshold indicates a higher sensitivity and can improve reliability
of lens.
EXIT
Exit the IR function menu and go back to the MAIN PAGE 3 to carry on setup of alarm setting.
ALARM SETTING
The integrated high speed dome provides eight alarm inputs and one alarm output (NO or NC) to connect alarm
devices. With this function, the dome can cooperate with alarm system to catch events’ images. For wiring,
please refer to the installation manual and/or qualified service personnel. Adjustable alarm parameters are
listed below.
Alarm Pin
The dome provides 8 alarm inputs and 1 output (NO / NC). Select an alarm connector which you want to
set its alarm-related parameters with this item, and then set its alarm-related parameters in the Alarm
Setting menu. For alarm pin definitions, please refer to Alarm Pin Definition or the installation manual.
Alarm Switch
The item is used to enable or disable the selected alarm pin function. Use the left/right direction keys on
the control keyboard to change the setting.