OpenEye CM-511 - Manual (Page 39)

29246AC 39
HOME SETTING
Users are able to set an operation mode to ensure constant monitoring. If the dome idles for a period of time,
the preset function will be activated automatically; this is the HOME function. The HOME function allows
constant and accurate monitoring so that to avoid the dome idling or missing events
Home Function
The item is used to enable or disable the HOME function. Use the left/right direction keys of the control
keyboard to change the setting.
Select Mode
Select one of the modes that the dome should execute when the HOME function is enabled and the
RETURN TIME expires. The options include , , and .
Use the left/right direction keys of the control keyboard to change the setting, and the items below will
change in cooperating with your selection.
Preset Point
Select a preset point where the dome should go after the Return Time function, which will be mentioned
later, is activated. The preset point(s) should be set prior either in the PRESET setup menu or through the
keyboard.
TOUR LINE - Select a Tour line that the dome camera should execute after the Return Time function is
activated. The Tour line(s) should be defined prior either in the TOUR setup menu or through the
keyboard.
AUTOSCAN LINE - Select an Auto Scan line that the dome camera should execute after the Return Time
function is activated. The Auto Scan line(s) should be defined prior either in the AUTOSCAN setup menu
or through the keyboard.
PATTERN LINE - Select a Pattern line that the dome camera should execute after the Return Time
function is activated. The Pattern lines should be defined prior either in the PATTERN setup menu or
through the keyboard.