OpenEye CM-511 - Manual (Page 31)

29246AC 31
TELEMETRY CTRL
Flip
Users can track an object continuously when it passes through under the dome camera with setting Flip to
IMAGE (digital flip) or M.E. (mechanical flip).
Image
IMAGE represents digital IMAGE FLIP, which enables users to keep tracking objects seamlessly; under
the mode, almost no delay occurs in comparing with that under the M.E. mode.
Note The Privacy Mask function will be automatically disabled if the Image Flip function is enabled,
and the screen will show “MASK WILL BE SET OFF.”
M.E. (Mechanical Flip)
M.E. is a standard mechanical operation. As the dome tilts to the maximum angle, it will pan 180°, and
then continue tilting to keep tracking objects.
Off
Select this item to disable the flip function.
Note To make the dome tilt between a specific range, such as-10° to +100° or -10 ° ~ +190°, go to
ANGLE ADJUSTER (see next section) to set the angle range of tilt. Otherwise, the dome will tilt
90° as the default setting.
Angle Adjuster
The item is for adjusting the angle of view. The Range of the view angle varies in different FLIP modes: the
angle ranges from -10
° to +100° in the M.E. FLIP and FLIP OFF modes, and from -10° ~ +190° in the IMAGE
FLIP mode.