OpenEye CM-511 - Manual (Page 30)

30
Image Inverse
Users can select to make the displayed image inversed vertically and horizontally. Occasions to employ
the function include conferences, demonstration, testing, etc. When this function is enabled, the preset masks
will be set off automatically (see Privacy Mask). The default setting is .
IMAGE INVERSE (OFF) IMAGE INVERSE (ON)
Freeze
Freeze function allows you to freeze the image while the camera is moving between preset positions such as in
PRESET and SEQUENCE modes. For example, when the Dome Camera is programmed to move from point A
to point B, if the Freeze function is activated, you will see point A, followed by point B, without displaying the
moving path.
Aperture
Under this setup menu, users can adjust enhancement of the edges of objects in the picture. The parameters of
H aperture and V aperture are adjustable, ranging from <00> to <16>.
Exit
Exit the IMAGE CTRL menu and go back to the MAIN PAGE 1 to set other functions under the
TELEMETRYCTRL menu.