OpenEye CM-511 - Manual (Page 25)

29246AC 25
CONFIGURATION MENU
The detailed functions and parameter settings of your high speed dome can be set through the OSD (On
Screen Display) menu with a control device, such as a control keyboard. The items in the OSD menu are
described in the following sections. For further detailed setup procedures, please refer to the user manual of
your installed control devices.
ENTERING THE OSD MENU
To enter the OSD menu of the selected camera:
Press key on the control keyboard and hold for 3 seconds to enter the OSD menu.
SELECTING A SETUP ITEM ON THE OSD MENU
To select the setup item:
Use direction keys on keyboard to move the OSD cursor in the OSD menu.
SETTING UP AN OSD ITEM
Use direction keys on keyboard to move the OSD cursor in the OSD menu.
For items with →, press right/left direction keys on the control keyboard to select.
For items with ↓, press the key on the control keyboard to enter the sub menu.
For items with →↓, users can use the right/left direction keys to select functions, and then press the
key on the control keyboard to enter the sub menu.
Note In the Camera OSD menu, the key functions as “ENTER” and “EXIT.”