OpenEye CM-511 - Manual (Page 4)

iv
Important Safeguards
1.
Read Instructions
Read all of the safety and operating instructions before using the product.
2.
Retain Instructions
Save these instructions for future reference.
3.
Attachments / Accessories
Do not use attachments or accessories unless recommended by the appliance manufacturer as they may cause
hazards, damage product and void warranty.
4.
Installation
Do not place or mount this product in or on an unstable or improperly supported location. Improperly installed
product may fall, causing serious injury to a child or adult, and damage to the product. Use only with a mounting
device recommended by the manufacturer, or sold with the product. To insure proper mounting, follow the
manufacturer's instructions and use only mounting accessories recommended by manufacturer.
5.
Power source
This product should be operated only from the type of power source indicated on the marking label.
Precautions
‰ Operating
z Before using, make sure power supply and others are properly connected.
z While operating, if any abnormal condition or malfunction is observed, stop using the camera
immediately and then contact your local dealer.
‰ Handling
z Do not disassemble or tamper with parts inside the camera.
z Do not drop or subject the camera to shock and vibration as this can damage camera.
z Do not block the cooling holes on the bracket. This camera has a cooling fan inside the housing.
Blocking the cooling holes will cause heat to build up and cause malfunction.
z Care must be taken when you clean the clear dome cover. Scratches and dust will ruin the image
quality of your camera. Do not use strong or abrasive detergents when cleaning the camera body.
Use a dry cloth to clean the camera when it is dirty. In case the dirt is hard to remove, use a mild
detergent and wipe the camera gently.