OpenEye OE-C7022 Quick Start - Manual

Please carefully read these instructions before using this product.
Save this document for future use.
32945AA
model no:
OE-C7022-FPW
OE-C7022-APW
Outdoor Repositionable
IP Dome Camera
Quick Start Guide
1. General Specifications
Model No. OE-C7022
FPW APW
Image Sensor Sony 1/2.8” CMOS
IP Rating IP66 (Outdoor)
Wide Dynamic Range True WDR
Minimum Illumination @ 50 IRE Color: 4.0 Lux @ F1.6
B/W: 0.8 Lux @ F1.6
Color : 4.6 Lux @ F3.5
B/W : 1.5 Lux @ F3.5
Minimum Illumination @ 30 IRE Color: 2.4 Lux @ F1.6
B/W: 0.5 Lux @ F1.6
Color : 2.8 Lux @ F3.5
B/W : 0.9 Lux @ F3.5
Day / Night True Day / Night (IR Cut Filter)
Resolution 1080p (2 MP)
Focal Length 4 mm (86° FoV) 5 ~ 25 mm (5x zoom)
(49.2° ~ 105.2° FoV)
Iris Control F 2.0 Fixed F3.5 ~ F3.7
Video Output 1.0Vpp 75Ω BNC Unbalanced
White Balance Auto, Manual, Preset
Auto White Balance Range 2000K ~ 11000K
Backlight Compensation Yes
Auto Gain Control Yes
Operating Temperature 14°F (-10°C) ~ 122°F (50°C)
Power Consumption 8.2W Max 9W Max
Rated Amperage 0.68A 0.75A
Imput Voltage Power over Ethernet / 12vDC
Weight 0.97 lb (439 g) 1.1 lb (499 g)
Dimensions (H x W) 3.27” x 4.92” (83mm x 125mm)
Housing / Dome Cover White / Clear
2. Products and
Accessories
3. Product Overview
9 0 ° 3 5 0 ° 4 9 . 2 ° ~ 1 0 . 5 2 °
23221 E Knox Ave
Liberty Lake, WA 99019
1.888.542.1103
8 6 ° /
Camera with Cables
Torx Wrench
Mount Plate
Template Sheet for
Installing by Bolt
& Nut
Manual CD &
Documents
Template Sheet for
Installing by Plate
Screw & Plastic
Anchor - 3 pcs
Mount Bolt & Nut
- 2 pcs
A
B
C
D
A - Dome Cover
B - 12vDC Cable
C - Ethernet Cable
D - Mount Plate
4. Before Installation
Note: When mounting the camera, it must be installed onto
a horizontal surface, ideally the ceiling. If you wish to mount
the camera to a vertical surface, such as the wall, you will
need to install a wall mount.
The camera is shipped with protective foam and plastic
covering to ensure product safety. Before installation, all
protective foam and plastic must be removed. The camera
dome cover must be removed to access all protective
packaging.