OpenEye CM-511 - Manual (Page 34)

34
7. To delete input characters, move the cursor to or and press to
select a character in the entry field. Then move the cursor to and press to
delete the selected character.
8. When the setting is completed, move the cursor to and press to save.
After completing tile setting, go back to the MAIN PAGE 2 to continue the setup of preset points.
PRESET
A total of 256 preset points can be set. Follow the steps below when in the preset setting menu.
Tip You can set preset points through the keyboard. Refer to the control keyboard user manual for more
information.
Setting Preset Points
1. Press the right/left key on the keyboard to select a number (1 represents preset point 1, 2 represents
preset point 2, etc.)
2. Press the key (ENTER) on the keyboard, and then rotate the dome camera to a
targeted shooting area/point.
3. Press the key again to save the defined preset point.
4. Once you have completed setup of a preset point, you can move the cursor to the next item to run the
preset point.
Running a Preset
Select the preset point that you want to execute. After pressing “ENTER”, the camera will turn to the appointed
point.
Exit the Preset Menu
Exit the PRESET menu and go back to the MAIN PAGE 2 to continue setup of Tour.