OpenEye OE-C7012-RW Quick Start - Manual

Please carefully read these instructions before using this product.
Save this document for future use.
32944AB
model no:
OE-C7012-RW
Outdoor Fixed IP
Dome Camera
Quick Start Guide
5 0 ° 3 6 0 ° 8 6 °
23221 E Knox Ave
Liberty Lake, WA 99019
1.888.542.1103
1. General Specifications
2. Products and
Accessories
3. Product Overview
Model No. OE-C7012-RW
Image Sensor Sony 1/2.8” CMOS
IP Rating IP66 (Outdoor)
Wide Dynamic Range True WDR
Minimum Illumination @ 30 IRE Color : 2.4 Lux @ F2.0, 30 IRE
B/W : 0.5 Lux @ F2.0, 30 IRE
Minimum Illumination @ 50 IRE Color : 4.0 Lux @ F1.6, 50 IRE
B/W : 0.8 Lux @ F1.6, 50 IRE
Day / Night True Day / Night (IR Cut Filter)
Resolution 1080p (2 MP)
Focal Length 4 mm (86° FoV)
Iris Control F 2.0
Video Output H .264 / MJPEG
White Balance Auto, Manual, Preset
Auto White Balance Range 2000K ~ 11000K
Backlight Compensation Yes
Auto Gain Control Yes
Operating Temperature 14°F ~ 122°F (-10°C ~ 50°C)
Power Consumption 4.3W Max
Rated Amperage 360mA
Imput Voltage PoE / 12vDC
Weight 1.0 lb (453.6 g)
Dimensions (H x W) 2.92” x 4.92” (74.3mm x 125mm)
Housing / Dome Cover Whtie / Clear
Camera with Cables
Torx Wrench
Mount Plate
Template Sheet for
Installing by Bolt
& Nut
Manual CD &
Documents
Template Sheet for
Installing by Plate
Screw & Plastic
Anchor - 3 pcs
Mount Bolt & Nut
- 2 pcs
A - Reset Button
B - Lens
C - Tilt Stopper Screw
D - Screw Mount Holes
A
C
E
F
B
4. Before Installation
Disassemble the camera:
1. Using the Torx wrench, remove the screws from the camera dome
cover.
2. Lift the dome cover off of the camera base.
5. Lens Orientation
Adjusting the camera position:
1. Twist the camera base to the desired position.
2. Tilt the camera to the desired
position, then tighten the Tilt
Stopper Screw to hold
the camera in position.
D
G
E- 12vDC Cable
F - Ethernet Cable
G - Mount Plate