NavCom LAND-PAK Rev.N - Manual (Page 186)

Technical Reference Manual Rev. N
Blk = All; Blu = IOP w/Internal Radio ; Red = IOP & LBM ; Grn = Engine only 184
$PNCTSET
This output message via the NMEA port is a NavCom proprietary NMEA type message. It
conforms to the header, checksum, and electrical characteristics of a standard NMEA string, but
is not recognized by the NMEA governing body as an officially sanctioned message.
Output
Format:
$PNCTSET,SET_dN,SET_dE,SET_dU,PT_dN,PT_dE,PT_dU,OL_dN,OL_dE,OL_dU*checksum
Field# Field Name Description
F1 time
UTC time for position fix in hours, minutes, seconds
(hhmmss.ss) (000000.00 to 235959.99)
F2 SET dN Solid earth tides, delta North (meters)
F3 SET dE Solid earth tides, delta East (meters)
F4 SET dU Solid earth tides, delta Up (meters)
F5 PT dN Polar Tides, delta North (meters)
F6 PT dE Polar Tides, delta East (meters)
F7 PT dU Polar Tides, delta Up (meters)
F8 Ocean Loading dN Ocean Loading, delta North (meters)
F9 Ocean Loading dE Ocean Loading, delta East (meters)
F10 Ocean Loading dU Ocean Loading, delta Up (meters)
F11 Checksum
Example: $PNCTSET,214040.00,-0.060,-0.018,0.110,,,,,,*47
The table below details the information contained in the following actual NCT SET output
message.
$PNCTSET,214040.00,-0.060,-0.018,0.110,,,,,,*47
NCT Solid Earth Tide (SET) NMEA message
$PNCTSET hhmmss.ss xxxx.xxx xxxx.xxx xxxx.xxx xxxx.xxx xxxx.xxx xxxx.xxx xxxx.xxx xxxx.xxx xxxx.xxx *hh
Label UTC
SET dN
(meters)
SET dE
(meters)
SET dU
(meters)
PT dN
(meters)
PT dE
(meters)
PT dU
(meters)
Ocean
Loading
dN
(meters)
Ocean
Loading
dE
(meters)
Ocean
Loading
dU
(meters)
CK
SUM
This NMEA message will be output ONLY when 0x49 message, W6 B6 is set to
Apply Correction.