NavCom SF-3050 Rev.E - Manual (Page 85)

SF-3050 GNSS Product User Guide
– Rev E
2-59
For the SF-3050M, the PVT data is output at up to
25Hz in the standard configuration, with the optional
upgrade of 50 and 100Hz.
 Internal Memory
See the Sapphire Technical Reference Manual and
the StarUtil 3000 User Guide for detailed instructions
on utilizing the SF-3050 internal memory flash drive.
 Control of Power Consumption
Power consumption may be immediately reduced on
the SF-3050 by disabling signals, as necessary, using
the [TRACKINGMODE] command. Refer to the
Sapphire Technical Reference Manual for instructions
on using this command.
 Continuously Operating Reference Station
(CORS) Support
When optioned as an RTK Base Station, the SF-3050
is capable of computing and outputting RTK message
streams in multiple formats and raw satellite
measurement data for post-processing
simultaneously. All message formats can be output
on one of the high-speed USB or Ethernet ports, or
messages can be distributed among any of the eight
user ports. The following is an example of a real
world application:

Com 1: NavCom proprietary corrections (x5B,
x5C, etc.); transmit via 900 or 400MHz radios

Com 2: CMR+; transmit via 900 or 400MHz radios

USB: Command and Control (StarUtil Interface)

Bluetooth: Command and Control (StarUtil
Interface)

Ethernet Port 1: Command and Control (StarUtil
Interface)