NavCom SF-3050 Rev.E - Manual (Page 191)

SF-3050 GNSS Product User Guide
– Rev E
E-165
4. Verify that both the PVT1B and RTKSTATUS1B
screens indicate that the navigation status
achieves “RTK Dual Fixed: RTCM3-Dual Full”.
This may take several seconds.
5. Enter the following command to disconnect from
the caster:
[NTRIPCLIENT]DISCONNECT
Refer to the Sapphire Technical Reference Manual
for detailed instructions on the [ECHODGPSB],
[MODEMCONFIG], [NTRIPCLIENT],
[NTRIPSERVER], [OUTPUT], and [RTKMODE]
commands.

The NTRIP client and server cannot both
be active at the same time. An error
message will be displayed if any
keyword other than a status request or
DISCONNECT is issued to one while the
other is active.

To send or receive corrections via
Ethernet instead of a modem, configure
the SF-3050 for Ethernet.