Use of this document – NavCom SF-3050 Rev.E User Manual
Page 20

SF-3050 Product User Guide
– Rev E
xviii
Updated information on the supplied
unterminated DC power cable: for Early
Production Units the cable is without a
filter (P/N 94-310262-3010LF); for Later
Production Units the cable has a filter
(P/N 94-310274-3010LF)
Revised section on the proper shutdown
of the SF-3050 via ignition pin
Removed 0x5D as a supported NCT RTK
correction type
Rev A (July 2009)
Initial release
Use of This Document
This User Guide is intended to be used by someone
familiar with the concepts of GNSS and satellite
surveying equipment.
Note indicates additional information to
make better use of the product.
This symbol means Reader Be
Careful. Indicates a caution, care,
and/or safety situation. The user might
do something that could result in
equipment damage or loss of data.
This symbol means Danger. You are in
a situation that could cause bodily
injury. Before you work on any
equipment, be aware of the hazards
involved with electrical and RF circuitry
and be familiar with standard practices
for preventing accidents.
Revisions to this User Guide can be obtained in
digital format from