Chapter 4, Installation, Antennae – NavCom SF-3050 Rev.E User Manual
Page 129: Table 6 for p/ns)
SF-3050 Product User Guide
– Rev D
4-103
Chapter 4 ................................. Installation
This chapter provides guidance on hardware
installation for optimum performance.
Antennae
The 5/8 inch BSW threaded antenna mount has a
depth of 16mm (0.63 inch).
It is possible to remove the 5/8 inch BSW threaded
alloy insert to reveal a secondary means of mounting
the antenna, a 1-14UNS-2B thread with a depth of
16mm (0.63 inch). This is a typical marine industry
mount for navigation antennas.
The BSW insert is secured in-place with
an adhesive, and its removal will change
the shock and vibration sustainability
characteristics of the antenna mount.
Figure 70: Rover, Base, Airborne GNSS Antennae
(see Table 6 for P/Ns)
Do not loosen or remove the Phillips
screws on the base of the antenna for
mounting purposes. This will VOID the
warranty and compromise the