NavCom SF-3050 Rev.E - Manual (Page 105)

SF-3050 GNSS Product User Guide
– Rev E
3-79
The Bluetooth Properties dialog box (refer to
Figure 57) displays the Bluetooth virtual COM port
assigned to the Bluetooth dongle. (Notate the
COM port number for use in step 15, below.)
Figure 57: Bluetooth Properties
11. Click OK on the Bluetooth Properties dialog box.
12. Open StarUtil 3000 on the PC.
13. Click the Connections button on the Shortcut bar
to open the Port Configuration dialog box (see
Figure 58).

The Bluetooth module can be in one of
two modes:
Command mode. It has no active
connection. It can receive commands
from any other port via an onboard
processor (Atmel).
Data Mode
– Once another device has
been connected to the receiver via
Bluetooth, an active connection has
been established and Bluetooth is in