Confirm starfire navigation, How to cancel a starfire license, Figure 37: nav mode: starfire – NavCom SF-3050 Rev.E User Manual
Page 56

SF-3050 Product User Guide
– Rev E
1-30
Confirm StarFire Navigation
77. Click Position, Velocity & Time on the Detailed
Views menu (see Figure 30) to determine if the
receiver is navigating in StarFire mode. The PVT
tab opens (see Figure 37).
The receiver enters StarFire mode
approximately 3 minutes after it is first turned
on; then the convergence period starts.
Figure 37: Nav Mode: StarFire
The Nav Mode: StarFire Dual:RTG: 3D: Dual
freq in Figure 37 indicates that the receiver is
navigating in StarFire dual frequency with a 3D
position fix, which is very accurate. RTG is
another term for StarFire (refer to the Glossary
at the end of this guide).
How to Cancel a StarFire License
At the time [CANCELSFLICENSE] is input, the
receiver must be tracking GPS satellites and
providing a valid position solution for the receiver to
accept the license cancellation.
78. Input the [CANCELSFLICENSE] command on the
Input Terminal window to cancel the current
StarFire license (see Figure 38).