Revision history – NavCom SF-3050 Rev.E User Manual
Page 16

SF-3050 Product User Guide
– Rev E
xiv
Revision History
Rev E
(Oct 2011)
Appendix C, changed StarFire visibility
from “76 N to 76 S latitude” “10 degree
look angle”
Chapter 3, revised the Note below Figure
55; added a Note regarding missing cable
pins
Added StarFire GNSS service
specifications throughout manual
Corrected 1PPS pulse characteristics in
Chapter 3
Specifications: added pulse width to
1PPS
Rev D
(Nov. 2010)
Updated graphics throughout , as
necessary, to reflect new StarUtil 3000
GUI designs
Added NTRIP standards to “Related
Standards” section in front matter
Chapter 1:
in the “Product Configuration
Files” section: updated the first Note to
reference Bundle A; in t
he “Connect
Equipment” section: updated the Note re
availability of Bluetooth connectivity; in
the “Establish Communications” section:
changed the USB driver warning to a
Note and added a Note re installing file
“navcomx1c45x3050.inf” before starting
Star Util 3000; deleted ambiguous Step
14; in new Step 14, added Mass Storage
as a USB Port option; updated Step 16
(now Step 15) to include AutoBaud
button; updated “Determine Current
Firmware Versions” section: added to the
Note that firmware ensembles are always
referenced to the Navigation Firmware
number; updated Figure 9 to include
unified file; added “Determine Firmware
Version via the Input Terminal” section; in
the “Upload Firmware” section: changed
the first two warnings to Notes; added