NavCom SF-3050 Rev.E - Manual (Page 29)

SF-3050 GNSS Product User Guide
– Rev E
1-3
Connect Equipment
Figure 1: SF-3050 Rear View
Refer to Figure 1 for the steps below:
1. Use one of the two supplied data cables for
communications:
DB9S cable (P/N 94-310260-3006LF):
Connect the Positronic connector end to
COM2 - USB at the rear of the SF-3050.
Connect the DB9S end to the PC.
Or
USB 2.0 Device cable (P/N 94-310266-
3006LF): Connect the Positronic connector
end to COM2 - USB at the rear of SF-3050.
Plug the USB plug end into the PC.

Refer to Chapter 3, Communication Ports,
for details on the ports and Bluetooth
connection.
ANTENNA COM1 - LAN POWER COM2 - USB