NavCom SF-3050 Rev.E - Manual (Page 111)

SF-3050 GNSS Product User Guide
– Rev E
3-85

Logging to USB Flash Drive via USB
Host Cable, for setup and logging
instructions.
Table 14: Optional USB Host Cable Pin Assignment
Figure 61: Optional USB Host Cable Pin Assignment
Ethernet Cable (Option)
P/N 94-310265-3006LF is an optional 6ft (1.83m)
data cable fitted with a Positronic plug type and a
Ethernet RJ45 plug type, used to connect directly to
an Ethernet connector. The pin assignments are
provided below.

COM1 - LAN is the only Ethernet (LAN)
compliant port.

Refer to the section below, Direct Ethernet
Connection via Static IP Address, for setup
instructions.
USB Pins Signal Positronic Pins
1 USB PWR 1
2 USB D- 8
3 USB D+ 7
4 GND/SHIELD 9
1
2
9
3
4
5
6
7
8
PN: 94-310271-3006LF
09-00005-A
1
2
3
4
5
6
7
8
9
Positronic
1
2
3
4
USB
Pin 1
Pin 4
USB A
Receptacle
Front View
NavCom
Receiver