Indicator panel, Figure 69: sf-3050 indicator panel, Table 18: gnss led indication – NavCom SF-3050 Rev.E User Manual
Page 126
SF-3050 Product User Guide
– Rev E
3-100
Indicator Panel
Figure 69: SF-3050 Indicator Panel
The indicator panel provides a quick status view of
the GNSS navigation/operating mode, StarFire signal
strength, the On/Off (I/O) switch, data I/O and
logging, and Bluetooth connectivity, respectively.
To power the unit on or off, depress the I/O switch for
more than 2 seconds. All LEDs illuminate for a period
of 3-5 seconds during power-up of the GNSS sensor.
In this chapter, refer to the section, Proper
Shutdown of SF-3050, for details on powering
off the unit.
GNSS LEDs
Table 18: GNSS LED Indication
Icon
Indicator
Status
Description
Power/GNSS
Off
Power off
Red
Power on but not
tracking
Green
Blinking
Acquiring or tracking
GNSS satellites (no
position fix yet)
Green
Using GNSS
satellites (position
fix)